Show Ipv6 Route - TP-Link T2600G-28TS Reference Manual

Syntax
show ipv6 interface
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the IPv6 information of the management interface:
T2600G-28TS(config)# show ipv6 interface

show ipv6 route

42.18
Description
This show ipv6 route command is used to display the IPv6 route entries of the
specified type.
Syntax
show ipv6 route [ static | connected ]
Parameter
static | connected —— Specify the route type. If not specified, all types of route
entries will be displayed.
static: The static routes.
connected: The connected routes.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the IPv6 static routes:
T2600G-28TS(config)# show ipv6 route static
387