Example
Output the log information with severity levels between 0-7 to the terminal
devices:
T2600G-28TS(config)# logging monitor level 7
clear logging
23.11
Description
The clear logging command is used to clear the information in the log buffer
and log file.
Syntax
clear logging [ buffer | flash ]
Parameter
buffer | flash —The output channels: buffer and flash. Clear the information of
the two channels, by default.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin and Operator level users have access to these commands.
Example
Clear the information in the log file:
T2600G-28TS(config)# clear logging buffer
show logging local-config
23.12
Description
The show logging local-config command is used to display the configuration
of the Local Log output to the console, the terminal, the log buffer and the log
file.
Syntax
show logging local-config
160