Show Port Isolation Interface - TP-Link T2600G-28TS Reference Manual

show port isolation interface

31.2
Description
The show port isolation interface command is used to display the forward port
list of a port/port channel.
Syntax
show port isolation interface [ gigabitEthernet port | port-channel
port-channel-id ]
Parameter
port —— The number of Ethernet port you want to show its forward port list, in
the format of 1/0/2.
port-channel-id —— The ID of port channel you want to show its forward port list,
ranging from 1 to 6.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the forward-list of port 1/0/2:
T2600G-28TS# show port isolation interface gigabitEthernet 1/0/2
Display the forward-list of all Ethernet ports and port channels:
T2600G-28TS# show port isolation interface
235