Dot1X Max-Reauth-Req - TP-Link T2600G-28TS Reference Manual

Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Configure the server's timeout value as 5 seconds:
T2600G-28TS(config)#dot1x timeout server-timeout 5

dot1x max-reauth-req

21.8
Description
The dot1x max-reauth-req command is used to configure the maximum
transfer times of the repeated authentication request when the server cannot be
connected. To restore to the default value, please use no dot1x
max-reauth-req command.
Syntax
dot1x max-reauth-req times
no dot1x max-reauth-req
Parameter
times —— The maximum transfer times of the repeated authentication request,
ranging from 1 to 9 in times. By default, the value is 3.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Configure the maximum transfer times of the repeated authentication request as
5:
T2600G-28TS(config)#dot1x max-reauth-req 5
142