Ethernet-Oam Remote-Loopback; Clear Ethernet-Oam Statistics - TP-Link T2600G-28TS Reference Manual

T2600G-28TS(config)# interface gigabitEthernet 1/0/1
T2600G-28TS(config-if)#
-remote-loopback process

ethernet-oam remote-loopback

35.9
Description
The ethernet-oam remote-loopback command is used to request the remote
peer to start or stop the Ethernet OAM remote loopback mode.
Syntax
ethernet-oam remote-loopback { start | stop }
Parameter
start —— Request the remote peer to start the Ethernet OAM remote loopback
mode.
stop —— Request the remote peer to stop the Ethernet OAM remote loopback
mode.
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet)
Privilege Requirement
Only Admin and Operator level users have access to these commands.
Example
Request the remote peer to start the Ethernet OAM remote loopback mode on
Gigabit Ethernet port 1/0/3:
T2600G-28TS(config)# interface gigabitEthernet 1/0/3
T2600G-28TS(config-if)# ethernet-oam remote-loopback start

clear ethernet-oam statistics

35.10
Description
The clear ethernet-oam statistics command is used to clear Ethernet OAM
statistics.
ethernet-oam remote-loopback
287
received