Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Enable Multicast VLAN 3, and configure Router Port Time as 100 seconds,
Member Port Time 100 seconds, and Static Router Port port 1/0/3:
T2600G-28TS(config)# ipv6 mld snooping multi-vlan-config 3 rtime 100
T2600G-28TS(config)# ipv6 mld snooping multi-vlan-config 3 mtime 100
T2600G-28TS(config)# ipv6 mld snooping multi-vlan-config 3 rport
interface gigabitEthernet 1/0/3
ipv6 mld snooping multi-vlan-config
38.13
(router-port-forbidden)
Description
This command is used to forbid the specified ports as being router ports in the
specified multicast VLAN. To delete the forbidden router ports, please use no
ipv6 mld snooping multi-vlan-config router-ports-forbidd command.
Syntax
ipv6 mld snooping multi-vlan-config [ vlan-id ] router-port-forbidd interface
{ gigabitEthernet port-list | port-channel port-channel-id }
no ipv6 mld snooping multi-vlan-config router-port-forbidd [ interface
{ gigabitEthernet port-list | port-channel port-channel-id } ]
Parameter
vlan-id—— The ID of the multicast VLAN.
port-list —— Forbid the specified ports as being router ports. Packets sent from
multicast routers to these ports will be discarded.
port-channel-id —— Forbid the specified port-channels as being router ports.
Packets sent from multicast routers to these port-channels will be discarded.
Command Mode
Global Configuration Mode
328