JetStream Smart Switch
Chapter 3 Connection
3.1
Ethernet Port
Connect an Ethernet port of the switch to the computer by RJ45 cable as the following figure shows.
Figure 3-1
Connecting the RJ45 Port
RJ45 Port
3.2
SFP Slot
The following figure demonstrates the connection of SFP module to an SFP slot.
Figure 3-2
Inserting the SFP Module
3.3
Verify Installation
After completing the installation, verify the following items:
There should be 5 to 10 cm of clearance around the device for ventilation and make sure the air flow
■
is adequate.
The voltage of the power supply meets the requirement of the input voltage of the device.
■
The power socket, device and rack are well grounded.
■
The device is correctly connected to other network devices.
■
09
Connection
RJ45 Cable
SFP Slot
SFP Module