Ethernet-Oam Remote-Loopback Received-Remote- Loopback - TP-Link JetStream TL-SL5428E Cli Reference Manual

TL-SL5428E(config-if)# ethernet-oam remote-failure dying-gasp notify
disable
ethernet-oam
loopback
Description
The ethernet-oam remote-loopback received-remote-loopback command is
used to configure the client to process or to ignore the received remote
loopback request. To return to the default configurations, please use no
ethernet-oam remote-loopback received-remote-loopback command.
Syntax
ethernet-oam remote-loopback received-remote-loopback { process |
ignore }
no ethernet-oam remote-loopback received-remote-loopback
Parameter
process —— Process the received remote loopback request.
ignore —— Ignore the received remote loopback request.
Command Mode
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Example
Configure the client to process the received remote loopback request on Fast
Ethernet port 1:
TL-SL5428E(config)# interface fastEthernet 1/0/1
TL-SL5428E(config-if)#
-remote-loopback process
TL-SL5428E JetStream L2 Managed Switch CLI Guide
remote-loopback
ethernet-oam
223
received-remote-
remote-loopback received