Loopback Detection Configuration; Using The Gui - TP-Link T1500-28PCT User Manual

Managing Physical Interfaces
4

Loopback Detection Configuration

4.1

Using the GUI

To avoid broadcast storm, we recommend that you enable storm control before loopback
detection is enabled. For detailed introductions about storm control, refer to
QoS .
Choose the menu L2 FEATURES > Switching > Port > Loopback Detection to load the
following page.
Figure 4-1 Configuring Loopback Detection
Follow these steps to configure loopback detection:
1) In the Loopback Detection section, enable loopback detection and configure the
global parameters. Then click Apply.
Loopback Detection Configuration
Configuring
Configuration Guide 100