To Remove The Fpd + Cover - Agilent Technologies Agilent 7890 Series Maintenance Manual

15
Maintaining the FPD
To Remove the FPD
C A U T I O N
WA R N I N G
300
+
+
Cover
1 Gather the following:
• T- 20 Torx screwdriver
2 Load the
become ready.
When turning off the GC, first turn off the flame to prevent
condensation from dripping into the jet and column.
Be careful! The detector may be hot enough to cause burns. If the
detector is hot, wear heat-resistant gloves to protect your hands.
Open the FPD detector top cover.
3
Loosen the screws securing the FPD cover to the top of
4
the detector.
GC maintenance method and wait for the GC to
Maintaining Your GC