Replacing Instrument Assemblies; To Remove The Instrument Cover - Agilent Technologies 83438A User Manual

To remove the instrument cover

1 Disconnect the power cord from the instrument.
2 Position the instrument so that you are looking at the rear panel.
3 Use a T-15 TORX driver to back out the screw that attaches the top cover to
the instrument.
Note that the screw is permanently secured to the cover.
4 After the screw is backed out, slide the cover toward the rear of the instrument
to remove it.
5 Remove the bottom cover using the same technique as used for the top cover.
6 Remove the two side covers.

Replacing Instrument Assemblies

Servicing
5-27