Waste Ink Tank; In Case Of Messages To Check Waste Ink; Replacing Cutter Blades - MIMAKI TxF150-75 Operation Manual

Chapter 4 Maintenance

Waste Ink Tank

Ink used during head cleaning and other processes is
collected in the waste ink tank at the lower right of the
machine.
The machine keeps track of the waste ink level. A "Check
Waste Ink Tank" message appears when the preset level
is reached. Use this a guide for replacing the waste ink
tank.
• The message is displayed when it reaches 80%
(1.6L ) of the 2L tank.
In case of messages to check
waste ink
Confirmation message in local mode
Check Waste Ink is displayed.
1
Check the waste ink tank.
2
• If there is an error with the actual amount, press
[]/[] to correct.
• Correct to less than 80% and press the [ENTER]
key to clear the message.
• If there is no discrepancy, replace (dispose of) the
waste ink tank referring to
the waste ink tank].
• Check the level in the waste ink tank frequently.
Continuing to using the machine without dispos-
ing of waste ink may result in waste ink overflow-
ing from the tank.
Replacing the waste ink tank
With the screen in local mode, select
1
[MENU] > [MAINTENANCE], and then press
the [ENTER] key.
• The Maintenance menu is displayed.
Select [REPLACE WasteInkTank] and
2
press the [ENTER] key.
Pull the waste ink tank stopper forward.
3

Waste ink tank

stopper
Hold the waste ink tank handle and pull it
4
toward the front to remove it.
4-18
5
New waste ink
tank
P.4-18 [Replacing
6
7

Replacing cutter blades

Replace cutters when blades are chipped or blunt.
• Attach the cap to the
removed waste ink
tank, and use tape to
prevent leakage of
waste ink.
• Request an industrial waste disposal company
to dispose of waste ink.
Mount a new waste ink tank.
Close waste ink tank stopper.
Press the [ENTER] key.
• The waste ink level will be reset.
• Avoid touching the cutter blade. Failure to do so
may result in injury.
• Avoid storing this product in locations accessible
to children.
Waste ink
tank
Cap