Setting The Tube Wash Intervals; Setting The Cleaning Intervals And Type; Suspend The Nozzle Cleaning - MIMAKI Tx300P-1800B Operation Manual

Setting the Tube Wash Intervals

For setting the interval at which washing of the ink tubes
will be carried out, in order to prevent ink clogging due to
coagulation of ink inside the ink tubes.
• In order to perform tube washing with the
Automatic Maintenance Function, the
maintenance washing liquid needs to be set. If the
maintenance washing liquid is not set, tube
washing operation will not be regularly conducted
and the passage could be clogged.
Press (MENU)
1
in LOCAL.
• MAINTENANCE MENU will be displayed.
Press to select "AUTO
2
MAINTENANCE", and press the
key.
Press , and press
3
• "PUMP TUBE CLEANING" will be selected.
Press to set the tube washing
4
interval, and press
• Set value : The set value will differ according to
the ink type being used.
Press the
5
end the setting.
Setting the Cleaning Intervals and
Type
The cleaning type and the interval between each cleaning
operation are set.
Press
(MENU)
1
in LOCAL.
• MAINTENANCE MENU will be displayed.
Press to select "AUTO
2
MAINTENANCE", and press the
key.
Press several times to select
3
"Interval" or "Type", and press the
key.
Press to select a set value, and
4
press the
• Set value : The set value will differ according to
the ink type being used.
• Set value of type : NORMAL/ HARD
• "Soft" can also be set when reactive dye ink Rc
400 or Rc 500 is used.
.
.
key several times to
key.
Press the
5
end the setting.

Suspend the nozzle cleaning

When you want to work as such a printing during the
nozzle cleaning, you can interrupt the nozzle cleaning.
• If the nozzle cleaning is interrupted, run the head
cleaning without waiting for the configured
cleaning time.
Press the
1
nozzle cleaning implement.
• Display the selection screen of the nozzle
cleaning stop.
NOZZLE WASH
CONTINUE<
Press to select "CANCEL".
2
• If you want to continue the nozzle cleaning, please
select [](CONTINUE).
• When reactive dye ink Rc 400 or Rc 500 is used
and the nozzle cleaning is stopped, the soft
cleaning will be started.
Chapter 4 Maintenance
key several times to
key during the
CANCEL?
>CANCEL
4-17
1
2
2
4
5
6