Setting A Key Buzzer; Set The Network - MIMAKI UJF-7151 plus Operation Manual

Setting a KEY BUZZER

You can turn off the buzzer sound when pressing the key.
Press the
1
key in LOCAL.
• MACHINE SETUP MENU will be displayed.
Press to select "KEY BUZZER" ,
2
and press the
Press to select a set value, and
3
press the
• Set value : ON/ OFF
Press the
4
end the setting.
• When the key buzzer is set to "OFF", the buzzer
sound for errors, warnings, operation completion,
etc. cannot be shut off.

Set the network

Press the
1
key in LOCAL.
• MACHINE SETUP MENU will be displayed.
Press to select "NETWORK" ,
2
and press the
Press to select "CHECK IP
3
ADDRESS" , and press the
• The IP address currently used by this machine is
displayed.
• When you have finished the check, press the
[ENTER] key.
• After connecting with the network, it takes time until
the IP address is determined. If the IP address has
not been determined, "0.0.0.0" is displayed.
Press to select "CHECK MAC
4
ADDRESS" , and press the
• The MAC address currently used by this machine
is displayed.
• When you have finished the check, press the
[ENTER] key.
Press to select "DHCP" , and
5
press the
Press to select a set value, and
6
press the
• Set value : ON/ OFF
(MENU) (>>)
key.
key.
key several times to
(MENU) (>>)
key.
key.
key.
key.
key.
• When it is ON, the IP address given by the DHCP
server is used.
Press to select "AutoIP", and
7
press the
Press to select a set value, and
8
press the
• Set value : ON/ OFF
• When it is ON, the IP address is determined by
the AutoIP protocol. However, DHCP is ON,
DHCP has priority.
Press to select "IP ADDRESS" ,
9
and press the
Press to select a set value, and
10
press the
Press the
11
end the setting.
• To reflect network setting, once turn off the power
supply and turn it on again.
Chapter 3 Setup
key.
key.
key.
key.
key several times to
3-21
3
2
2
2