Table of Contents
Advertisement
Menu mode
This machine has 4 modes. Each menu mode is described below.
NOT-READY mode
This is the mode in which the media has not been detected yet.
The keys other than the
LOCAL mode
Local mode is the mode for the drawing preparation state.
All the keys are effective.
The machine can receive data from the computer.However, it does not perform printing.
Screen display in Local mode
Displays current user type
(
P.2-2).
This mode permits the following operations:
• Pressing the JOG keys to set up a drawing origin and drawing area.
• Pressing the
• Pressing the
• Pressing the
• Pressing the
• Pressing the
name, the firmware version, and so on.
• Pressing the
• Pressing the
• Pressing the
• Pressing the
FUNCTION mode
To set FUNCTION mode, press the
In this mode, printing conditions can be set.
REMOTE mode
This machine prints the data it receives.
During drawing, the drawing is interrupted by pressing the
Downloaded From ManualsPrinter.com Manuals
key and the /
<LOCAL.1>
width:1000mm
key to perform [TEST DRAW].
key to execute the cleaning of the heads.
key to set functions.
key to set the temperature of the heaters.
key to check the remaining amount of ink, the description of the cartridge error, the model
key to switch between [REMOTE mode] and [LOCAL mode].
key to erase the printing data the machine has received.
key to change the user type.
key to activate directly [ST.MAINTENANCE], one of the [MAINTENANCE] functions.
key when this machine is in LOCAL mode.
key are effective.
Displays machine name
[#01]
(
P.3-50) to recognize the device.
Displays the detected media width.
key.
1
3
4
5
6
1-15
Advertisement
Table of Contents
