Sp Network Setting Changes Are Not Saved In The System; System Fails To Boot After Upgrading From Sw 1.3 To Sw 1.6 Or Sw - Oracle Sun Fire X4170 M2 Product Notes

Refresh the BIOS utility page twice after setting the new SP IP address.

SP network setting changes are not saved in the system

Bug ID 25887860
If you use the BIOS utility to change SP network settings from DHCP to static, the settings do
not get saved in the system.
Affected Software:
Software Releases 1.10 and 1.10.1
■
Workaround:
When using the BIOS utility, commit the network setting changes twice. As an alternative, use
the command-line interface or web user interface to make network setting changes.
System fails to boot after upgrading from SW 1.3 to SW 1.6 or
SW 1.7
Bug ID 16868222
If your server is equipped with a Sun Storage 8-Port 6Gbps SAS-2 PCIe HBA (Internal), before
upgrading from SW 1.3 to SW 1.6 or SW 1.7 you must first upgrade the firmware on your Sun
Storage 8-Port 6Gbps SAS-2 PCIe HBA (Internal) to version 11.05.02.00 or newer.
Otherwise the server repeatedly reboots shortly after initializing the Sun Storage 8-Port 6Gbps
SAS-2 PCIe HBA (Internal).
Affected Hardware:
Sun Fire X4170 M2 Server
■
Sun Fire X4270 M2 Server
■
Workaround:
Upgrade the firmware on your Sun Storage 8-Port 6Gbps SAS-2 PCIe HBA (Internal) to
version 11.05.02.00 or newer before updating to SW 1.6 or SW 1.7.
If you upgrade from SW 1.3 to SW 1.6 or SW 1.7 and your server fails to reboot properly:
1. Downgrade your server to SW 1.3.
Sun Fire X4170 M2 and X4270 M2 Servers Product Notes
Known Issues
27