Tools Required To Install The Mx240 Router With A Mechanical Lift - Juniper mx240 Hardware Manual

MX240 3D Universal Edge Router Hardware Guide
Related
Documentation

Tools Required to Install the MX240 Router with a Mechanical Lift

Related
Documentation
Removing Components from the MX240 Router Before Installing it with a Lift
170
Installing the MX240 Chassis in the Rack Manually on page 186
Connect cables to the network and external devices as described in
6.
MX240 Router to Management and Alarm Devices" on page
Connect the grounding cable as described in
7.
Connect the AC power cord or DC power cables:
8.
Powering On an AC-Powered MX240 Router on page 196
Powering On a DC-Powered MX240 Router on page 200
Power on the router:
9.
Perform the initial system configuration as described in
10.
Router" on page 213.
Definition of Safety Warning Levels on page 411
MX240 Router Physical Specifications on page 103
To install the router, you need the following tools:
Mechanical lift
Phillips (+) screwdriver, number 2
7/16-in. (11 mm) nut driver
ESD grounding wrist strap
Removing Components from the MX240 Router Before Installing it with a Lift on page 170
Installing the MX240 Router By Using a Mechanical Lift on page 175
Reinstalling Components in the MX240 Router After Installing it with a Lift on page 177
To make the router light enough to install, you first remove most components from the
chassis. The procedures in this section for removing components from the chassis are
for initial installation only, and assume that you have not connected power cables to the
router. The following procedures describe how to remove components from the chassis,
first from the rear and then from the front:
Removing the Power Supplies Before Installing the MX240 Router with a Lift on page 171
1.
Removing the Fan Tray Before Installing the MX240 Router with a Lift on page 171
2.
3. Removing the SCBs Before Installing the MX240 Router with a Lift on page 172
Removing the DPCs Before Installing the MX240 Router with a Lift on page 173
4.
Removing the FPC Before Installing the MX240 Router with a Lift on page 174
5.
"Connecting the
205.
"Grounding the MX240 Router" on page
"Initially Configuring the MX240
Copyright © 2016, Juniper Networks, Inc.
194.