MX240 3D Universal Edge Router Hardware Guide
Installing the MX240 Normal-Capacity Fan Tray
262
Figure 113: Removing the Fan Tray
To install the fan tray (see
Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
1.
ESD points on the chassis.
Grasp the fan tray handle, and insert it straight into the chassis. Note the correct
2.
orientation by the
this side up
Tighten the captive screws on the fan tray faceplate to secure it in the chassis.
3.
Figure 89 on page
226):
label on the top surface of the fan tray.
Copyright © 2016, Juniper Networks, Inc.