MX240 3D Universal Edge Router Hardware Guide
Related
Documentation
Installing an MX240 FPC
230
Figure 92: Attaching a Cable to a DPC
MX240 Dense Port Concentrator (DPC) Description on page 47
MX240 Dense Port Concentrator (DPC) LEDs on page 52
Maintaining MX240 DPCs on page 360
Troubleshooting the MX240 DPCs on page 380
Removing an MX240 DPC on page 279
Removing a Cable on an MX240 DPC, MPC, MIC, or PIC on page 300
An FPC takes up two DPC slots on the MX240 router. One FPC can be installed horizontally
in the front of the router. The FPCs are hot-insertable and hot-removable. A fully
configured FPC can weigh up to 18 lb (8.2 kg). Be prepared to accept its full weight.
To install an FPC (see
Figure 93 on page
Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
1.
ESD points on the chassis.
Place the FPC on an antistatic mat.
2.
232):
Copyright © 2016, Juniper Networks, Inc.