MX240 3D Universal Edge Router Hardware Guide
Related
Documentation
Storing an MX240 DPC
Related
Documentation
Maintaining MX240 FPCs
Purpose
364
Maintaining MX240 DPCs on page 360
MX240 DPC Terminology
Storing an MX240 DPC on page 364
Troubleshooting the MX240 DPCs on page 380
Replacing an MX240 DPC on page 279
You must store a DPC as follows:
In the router
In the container in which a spare DPC is shipped
Horizontally and sheet metal side down
When you store a DPC on a horizontal surface or in the shipping container, always place
it inside an antistatic bag. Because the DPC is heavy, and because antistatic bags are
fragile, inserting the DPC into the bag is easier with two people. To do this, one person
holds the DPC in the horizontal position with the faceplate facing the body, and the other
person slides the opening of the bag over the DPC connector edge.
If you must insert the DPC into a bag by yourself, first lay the DPC horizontally on a flat,
stable surface, sheet metal side down. Orient the DPC with the faceplate facing you.
Carefully insert the DPC connector edge into the opening of the bag, and pull the bag
toward you to cover the DPC.
Never stack a DPC under or on top of any other component.
Maintaining MX240 DPCs on page 360
MX240 DPC Terminology
Holding an MX240 DPC on page 362
Troubleshooting the MX240 DPCs on page 380
Maintaining MX240 DPCs on page 360
The MX240 router can have one Flexible PIC Concentrator (FPC) installed horizontally
in the front of the chassis. For optimum router performance, verify the condition of the
FPC.
Copyright © 2016, Juniper Networks, Inc.