Mx240 Compliance Statements For Nebs - Juniper mx240 Hardware Manual

MX240 3D Universal Edge Router Hardware Guide
Related
Documentation

MX240 Compliance Statements for NEBS

Related
Documentation
452
EN-61000-4-4 EFT
EN-61000-4-5 Surge
EN-61000-4-6 Low Frequency Common Immunity
EN-61000-4-11 Voltage Dips and Sags
ETSI
ETSI EN-300386-2 Telecommunication Network Equipment. Electromagnetic
Compatibility Requirements
The router is designed to comply with the following standards:
NEBS
GR-1089-Core: EMC and Electrical Safety for Network Telecommunications
Equipment
SR-3580 NEBS Criteria Levels (Level 3 Compliance)
GR-63-Core: NEBS, Physical Protection
MX240 Compliance Statements for NEBS on page 452
Compliance Statements for EMC Requirements for the MX240 Router on page 453
Compliance Statements for Environmental Requirements for Juniper Networks Devices
on page 454
Compliance Statements for Acoustic Noise for the MX240 Router on page 454
The equipment is suitable for installation as part of the Common Bonding Network
(CBN).
The equipment is suitable for installation in locations where the National Electrical
Code (NEC) applies.
The battery return connection is to be treated as an isolated DC return (i.e. DC-I), as
defined in GR-1089-CORE.
For Juniper Networks systems with AC power supplies, an external surge protective
device (SPD) must be used at the AC power source.
Agency Approvals for MX Series Routers on page 451
Compliance Statements for EMC Requirements for the MX240 Router on page 453
Compliance Statements for Environmental Requirements for Juniper Networks Devices
on page 454
Compliance Statements for Acoustic Noise for the MX240 Router on page 454
Copyright © 2016, Juniper Networks, Inc.