Juniper mx240 Hardware Manual page 172

MX240 3D Universal Edge Router Hardware Guide
Related
Documentation
142
WARNING:
Translation from Japanese: The attached power cable is only for this product.
Do not use the cable for another product.
NOTE: In North America, AC power cords must not exceed 4.5 m
(approximately 14.75 ft) in length, to comply with National Electrical Code
(NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52, and Canadian Electrical
Code (CEC) Section 4-010(3). You can order AC power cords that are in
compliance.
WARNING: The router is pluggable type A equipment installed in a
restricted-access location. It has a separate protective earthing terminal
(sized for UNC 1/4-20 ground lugs) provided on the chassis in addition to the
grounding pin of the power supply cord. This separate protective earthing
terminal must be permanently connected to earth.
CAUTION: Power cords and cables must not block access to device
components or drape where people could trip on them.
MX240 AC Power Supply Description on page 86
Connecting Power to an AC-Powered MX240 Router with Normal-Capacity Power
Supplies on page 195
Replacing an MX240 AC Normal-Capacity Power Supply on page 315
Replacing an MX240 AC Power Supply Cord on page 317
MX240 AC Power Electrical Safety Guidelines and Warnings on page 444
AC Power Supply Electrical Specifications for the MX240 Router on page 129
Copyright © 2016, Juniper Networks, Inc.