Connecting The Mx240 Router To The Network; Tools And Parts Required For Mx240 Router Connections; Connecting The Mx240 Router To Management And Alarm Devices - Juniper mx240 Hardware Manual

CHAPTER 18
Connecting the MX240 Router to the
Network

Tools and Parts Required for MX240 Router Connections

Related
Documentation

Connecting the MX240 Router to Management and Alarm Devices

Copyright © 2016, Juniper Networks, Inc.
Tools and Parts Required for MX240 Router Connections on page 205
Connecting the MX240 Router to Management and Alarm Devices on page 205
Connecting the MX240 Router to a Network for Out-of-Band Management on page 208
Connecting the MX240 Router to a Management Console or Auxiliary Device on page 209
Connecting the MX240 Router to an External Alarm-Reporting Device on page 210
Connecting DPC, MPC, MIC, or PIC Cables to the MX240 Router on page 211
To connect the router to management devices and line cards, you need the following
tools and parts:
Phillips (+) screwdrivers, numbers 1 and 2
2.5-mm flat-blade (-) screwdriver
2.5-mm Phillips (+) screwdriver
Wire cutters
Electrostatic discharge (ESD) grounding wrist strap
Connecting the MX240 Router to Management and Alarm Devices on page 205
Connecting DPC, MPC, MIC, or PIC Cables to the MX240 Router on page 211
Connecting the MX240 Router to a Network for Out-of-Band Management on page 206
Connecting the MX240 Router to a Management Console or Auxiliary Device on page 206
Connecting the MX240 Router to an External Alarm-Reporting Device on page 207
205