Juniper mx240 Hardware Manual page 361

Universal edge router
Hide thumbs Also See for mx240:
Table of Contents

Advertisement

Copyright © 2016, Juniper Networks, Inc.
user@host> show chassis routing-engine 0
Routing Engine Status:
Slot 0:
Current State
Present
Verify that the Current State is Present, which indicates that the Routing Engine is
offline.
Take the first fabric plane of the backup Routing Engine offline by issuing the
7.
chassis fabric plane 0 offline
2, and 3.
Verify that the fabric plane is offline by issuing the
8.
command.
user@host> show chassis fabric summary
Plane State Uptime
0 Offline
1
Online 3 minutes, 45 seconds
Verify that the State of plane 0 is Offline.
Take the remaining fabric planes offline by issuing the
9.
command—that is, by changing the fabric plane number each time. Verify
1/2/3 offline
that the fabric planes are offline by issuing the command given in Step 4.
Take the SCB in slot 0 offline by issuing the
10.
Verify that the control board is offline by issuing the
11.
command:
user@host> show chassis environment cb 0
CB 0 status:
State
Offline
Power 1
Disabled
Power 2
Disabled
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
12.
the strap to one of the ESD points on the chassis.
Remove and replace the offline SCB on the router with the SCBE. Use the replacement
13.
procedure described in
Verify that the installation is successful and SCB0 is online by issuing the
14.
command:
environment cb 0
user@host> show chassis environment cb 0
CB 0 status
State
Online
Temperature 30 degrees C / 86 degrees F
Other details such as power are also displayed along with the state.
Verify that the fabric planes come online correctly by issuing the
15.
command:
summary
user@host> show chassis fabric summary
Plane State Uptime
0 Online 2 minutes, 5 seconds
1 Online 1 minute, 55 seconds
Chapter 27: Replacing Switch Fabric Components
command. SCB0 has four fabric planes numbered, 0, 1,
request chassis cb offline slot 0
"Removing an MX240 SCB" on page
show chassis fabric summary
request chassis fabric plane
command.
show chassis environment cb 0
335.
show chassis
show chassis fabric
request
331

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mx240 3d

Table of Contents