MX240 3D Universal Edge Router Hardware Guide
Installing the MX240 Air Filter
Related
Documentation
260
Figure 111: Removing the Air Filter
To install the air filter (see
Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
1.
ESD points on the chassis.
Locate the up arrow and ensure that the air filter is right side up.
2.
Slide the air filter straight into the chassis until it stops.
3.
Align the captive screws of the air filter cover with the mounting holes on the chassis.
4.
Tighten the captive screws on the air filter cover.
5.
Figure 112: Installing the Air Filter
MX240 Cooling System Description on page 17
Maintaining the MX240 Air Filter on page 356
Figure 88 on page
225):
Copyright © 2016, Juniper Networks, Inc.