As Mlc Components; Mlc - Juniper mx240 Hardware Manual

MX240 3D Universal Edge Router Hardware Guide
80
and high-speed fabric interface to MX routers. Graceful Routing Engine switchover is also
supported on the AS MLC.
Integrated with application forwarding on MX Series routers, the AS MLC provides
increased service flexibility with reduced power and space requirements for the network
infrastructure.

AS MLC Components

Each AS MLC consists of the following components:
AS MLC Modular Carrier Card (AS MCC), which fits horizontally in front of the MX240
router, includes two slots for the Application Services Modular Storage Card (AS MSC)
and Application Services Modular Processing Card (AS MXC)
AS MXC with 64 GB RAM for processing
AS MSC with 400 GB NAND Flash capacity for modular storage
NOTE: The AS MCC, AS MXC, and AS MSC are hot-removable and
hot-insertable
Switch fabric interfaces to the chassis
XM ASIC chip, which owns and manages the packet data memory built from external
DDR3 memory chips, the fabric queuing system, a portion of the WAN queuing system,
and the host queuing system
LU ASIC chip, which performs all functions relating to header processing including input
processing, route lookup, classification, filtering, policing, accounting, encapsulation,
and statistics
Midplane connectors and power circuitry
Processor Mezzanine Board (PMB), which contains the host processor and supporting
peripherals.
LED on the AS MCC, which displays the status of the AS MLC
MX240 SCB, Power Supply, and Cooling System Requirements for AS MLC
Each MX240 router requires specific SCB, power supply, and cooling system models to
run the AS MLC:
SCB—Enhanced MX Switch Control Board (SCBE-MX). See
on page 93 for details
Power supply:
2520W AC power supply—Model PWR-MX480-2520-AC
2400W DC power supply—Model PWR-MX480-2400-DC
Power requirement for AS MLC:
AS MCC—191W
"MX240 SCBE Description"
Copyright © 2016, Juniper Networks, Inc.