Replacing An Mx240 Mpc; Figure 135: Installing A Mic - Juniper mx240 Hardware Manual
Universal edge router
Hide thumbs
Also See for mx240:
- Hardware manual (512 pages) ,
- Instruction for upgrading (35 pages) ,
- Quick start manual (31 pages)
Table of Contents
Advertisement
MX240 3D Universal Edge Router Hardware Guide
Related
Documentation
Replacing an MX240 MPC
292
CAUTION:
Avoid bending fiber-optic cable beyond its minimum bend
radius. An arc smaller than a few inches in diameter can damage the cable
and cause problems that are difficult to diagnose.
Use one of the following methods to bring the MIC online:
11.
Press the MIC offline/online button until the MIC
Issue the following CLI command:
user@host> request chassis mic fpc-slot mpc-slot mic-slot mic-slot online
For more information about the command, see the
The normal functioning status LED confirms that the MIC is online. You can also verify
correct MIC functioning by issuing the
in
"Maintaining MX240 MICs" on page
Figure 135: Installing a MIC
MX240 Modular Interface Card (MIC) Description on page 67
Maintaining MX240 MICs on page 369
Troubleshooting the MX240 MICs on page 384
MX240 MIC Serial Number Label on page 398
Removing an MX240 MPC on page 293
1.
Installing an MX240 MPC on page 295
2.
LED lights green.
OK/FAIL
CLI Explorer
show chassis fpc pic-status
369.
Copyright © 2016, Juniper Networks, Inc.
.
command described
Advertisement
Table of Contents
Troubleshooting
