Figure 155: Do Not Grasp The Connector Edge; Figure 156: Do Not Rest The Dpc On An Edge - Juniper mx240 Hardware Manual

Chapter 29: Maintaining Components

Figure 155: Do Not Grasp the Connector Edge

Never carry the DPC by the faceplate with only one hand.
Do not rest any edge of a DPC directly against a hard surface (see Figure 156 on page 363).
Do not stack DPCs.

Figure 156: Do Not Rest the DPC on an Edge

If you must rest the DPC temporarily on an edge while changing its orientation between
vertical and horizontal, use your hand as a cushion between the edge and the surface.
Copyright © 2016, Juniper Networks, Inc. 363