Related
Documentation
Installing an MX240 AS MXC
Copyright © 2016, Juniper Networks, Inc.
For more information about the command, see the
The normal functioning status LED confirms that the AS MSC is online. You can also
verify correct AS MSC functioning by issuing the
Figure 101: Installing an AS MSC
MX240 Application Services Modular Storage Card Description on page 81
Replacing an MX240 AS MSC on page 309
Preventing Electrostatic Discharge Damage to an MX240 Router on page 416
To install an AS MXC (see
Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
1.
ESD points on the chassis.
Align the notches in the connector at the rear of the AS MXC with the notches in the
2.
AS MXC slot (slot 1—the bottom slot in the AS MLC), and then slide the AS MXC in
until it lodges firmly in the AS MLC.
show chassis fpc pic-status
Figure 102 on page
244):
Chapter 21: Installing Components
.
CLI Explorer
.
243