Recovering The Server Blade Bios - Fujitsu PRIMERGY BX630 Service Supplement Manual

Diagnosis and Maintenance
5.2

Recovering the Server Blade BIOS

This section describes how to recover the BIOS of a server blade in the event
of an error.
V
ATTENTION!
This procedure must only be used in the event of an error.
Requirements
– The basic unit is connected to the mains.
– The server blade has been switched off.
– An external floppy disk drive is present.
Creating a BIOS flash floppy disk
Ê Extract the BIOS update ZIP archive file on a PC hard disk.
I
The data for creating the BIOS flash floppy disk is contained in the
software pool
http://support.fujitsu-siemens.com/com/support/downloads.html.
Ê Insert an empty diskette into the floppy disk drive.
Ê Run the FSC_xxx.exe program and follow the instructions on the screen to
create a BIOS flash diskette.
Recovering the server blade BIOS
Ê Connect the monitor, keyboard and mouse to the KVM connector on the rear
of the blade server chassis, see Operating Manual.
Ê Remove the server blade from the blade server chassis (see
open it.
Recovering the Server Blade BIOS
Rev. 2.0
page 19) and
33