Nortel Circuit Card Installation Manual page 499

— Hotline (call the Autodial number upon connection)
• Wire test
— Disabled (can be invoked only with front panel switch)
— Enabled (start only if the DAC firmware is idle)
• Language
— English
— Quebec French
• Keyboard dialing
— Enabled (allow both keyboard or Hayes dialing modes)
— Disabled (Hayes dialing only)
• Make port busy
— Disabled—On with DTR (normal)
— Enabled—Off with DTR (modes 8 or 12, and no DTR for 5 seconds)
• Auto Baud
— Variable (use auto baud rate)
— Fixed (use baud rate selection only)
• Baud rate
— 110
— 150
— 300
— 600
— 1200
— 2400
— 4800
— 9600
— 19200
• Operating mode
NT7D16 Data Access card
Circuit Card
Page 499 of 906
Description and Installation