Nortel Circuit Card Installation Manual page 479

NT7D16 Data Access card Page 479 of 906
By entering S on the keyboard, you enter the Speed Call Modify menu. The
Speed Call number can also be changed in the software. Respond to the
following prompts to change the Speed Call number.
S<CR>
Enter access code <SP>
Current Speed Call number: zzzzzzz
Enter Speed Call number: <SP>
zzzzzzz<CR>
New Speed Call number: xxxxxxx
By entering R on the keyboard, you enter the Remote Loopback Modify
menu. Respond to the following prompts to enable or disable the Remote
Loopback feature.
R <CR>
Remote Loopback Disabled (or enabled, indicating current status)
Remote Loopback
(Y/N): <SP>
Y <CR> or N <CR>
Remote Loopback: Enabled (or Disabled)
By entering M on the keyboard, you enter the Manual Answer Modify menu.
Manual Answer indicates that the DAC prompts the user to answer an
incoming data call. Auto answer picks up the call after the specified number
Circuit Card Description and Installation