Nortel Circuit Card Installation Manual page 481

NT7D16 Data Access card Page 481 of 906
By entering L on the keyboard, you enter the Long Break Detect Modify
menu. Respond to the following prompts to enable or disable the detection of
the Long Break as an abandon signal.
L <CR>
Long Break:Detected
Ignored
Detect Long Break? (Y/N): <SP>
Y <CR> N <CR>
Long Break: Detected Long Break: Ignored
To exit the Modify menu, enter Q. This entry returns you to the Primary
commands menu. To view the port's parameters, enter D when in the Primary
Commands menu. This display shows the Display Options menu.
Display Options Menu:
A - Auto Dial number D - Date and Time
K - Feature Keys P - Data Port Parameters
Q - Quit Display S - Speed Call number(s)
CTRL Z (Abort Keyboard Dialing)
Select: <SP>
Ring Again
When a call is placed to a busy DN, the DAC prompts you to activate Ring
Again. The Ring Again feature alerts you as soon as the dialed DN becomes
free. Once the Ring Again has been activated, you will return to the Primary
Commands menu. The following is the prompt and response sequence
enabling the Ring Again feature.
Circuit Card Description and Installation