Basic Commands - Nortel Circuit Card Installation Manual

Page 228 of 906

Basic commands

553-3001-211 Standard 3.00
NT5D11 and NT5D14 Lineside T1 Interface cards
A space is inserted between the login command (L), the shelf address, and the
card slot address.
The MMI then prompts for a password. The password is "LTILINK", and it
must be typed all in capital letters.
After logging in, the prompt will then look like this:
• LTI:::> for single-card installations
• LTI:ss cc> for multi-card installations, where ss represents the two-digit
address, and cc represents the two-digit card slot address
MMI commands can now be executed. There are seven basic commands that
can be combined together to form a total of 19 command sets. They are:
• Alarm
• Clear
• Display
• Set
• Test
• Help
• Quit
August 2005