Connecting Apple Macintosh To The Dac; Upgrading Systems - Nortel Circuit Card Installation Manual

Page 522 of 906

Connecting Apple Macintosh to the DAC

Upgrading systems

553-3001-211 Standard 3.00
NT7D16 Data Access card
Table 172
Print out example (Part 2 of 2)
AUTB
BAUD
DCD
PRM
DEM
DLNG
KBD
WIRE
PBDO
Note: The Upload parameters are printed only when a single TN is
specified.
The Apple Macintosh can be connected with twisted pair wire to a port of a
NT7D16 Data Access Card (DAC) to allow access to the switching
capability. The Macintosh can then access local or remote terminals, personal
computers, hosts, and peripherals.
Figure 102 on page 523
the Macintosh. Figure 103 on
the Macintosh.
The following explains when and how to upgrade your system to support the
DAC. Ports 0, 1, 2, and 3 of the DAC will work in any standard 16-pair IPE
slot (connect directly to the MDF).
August 2005
DBASE
R-232 or R-422
ON
9600
OFF
KBD ON
DCE
FRN
ON
OFF
OFF
shows the 9-pin subminiature D (DB9) connection to
page 523 shows the mini-8 DIN connection to
UPLOAD
R-232 or R-422
ON
4800
OFF
KBD ON
DCE
FRN
ON
OFF
OFF