Nortel Circuit Card Installation Manual page 337

Cable diagrams
Figure 73 on
typical cabling configurations for the DDP2.
Figure 73 shows a typical DDP2 cabling for a system with an I/O panel, with
the connection between the I/O panel and a Network Channel Terminating
Equipment (NCTE).
Figure 74 shows cabling for a system without an I/O panel. Here, the DDP2
faceplate is cabled directly to the NCTE.
Note: Since several clock cabling options exists, none has been
represented in the diagrams. Refer to "Clock configurations" on
page 356
NT5D97 Dual-port DTI2/PRI2 card
page 338 and Figure 74 on
for a description on each available option.
page 339 provide examples of
Circuit Card Description and Installation
Page 337 of 906