Page 484 of 906
Not in service
No response from the system
553-3001-211
Standard 3.00
NT7D16 Data Access card
When the DAC attempts a call to a DN that is not supported, it sends you a
message. The call is released, and you must reenter the Autobaud character
<CR> to initiate keyboard dialing again.
C<CR>
ENTER NUMBER:<SP>
xxxxxxx<CR>
CALLING xxxxxxx
NOT IN SERVICE
RELEASED
Likewise, when the DAC receives no system response from your port after a
30-second timeout period, the DAC sends you a message. The call is
abandoned. This means the port is either disabled or unequipped.
C<CR>
ENTER NUMBER:<SP>
xxxxxxx<CR>
NO SYSTEM RESPONSE
RELEASED
August 2005