Nortel Circuit Card Installation Manual page 287

Basic commands
Figure 46
HELP (H, ?) screen
ALARM USAGE: Alarm [Enable | Disable]
CLEAR USAGE: Clear [Alarm] | [Error counter] [Log]
DISPLAY USAGE: Display [Alarm | Status | Perform | History] [Pause]
HELP USAGE: Help | ?
SET USAGE: Set[Time | Date | Alarm | Clearing | Name Memory | Mode | Simple
TEST USAGE: Test [Carrier All]
QUIT USAGE: Quit
Notation Used:
CAPS - Required Letters
NT5D33 and NT5D34 Lineside E1 Interface cards
LEI::ss cc> (for multi-card installations, where ss represents the shelf
address and cc represents the card slot address.)
MMI commands can now be executed. The seven basic commands are:
• Help
• Alarm
• Clear
• Display
• Set
• Test
• Quit
Type ? <CR> to list these commands, along with an explanation of their
usage. A screen similar to Figure 46 will appear. The help screen will also
appear by typing H<CR>, or HELP<CR>.
[ ] - Optional | - Either/Or
Circuit Card Description and Installation
Page 287 of 906