Again prompt within a software determined time period, Ring Again is
canceled, and the Primary Commands Menu appears.
DATA STATION NOW AVAILABLE, PLACE CALL? (Y/N/<Y>): <SP>
Y <CR>
CALLING XXXX
RINGING
ANSWERED
CALL CONNECTED. SESSION STARTS
Note 1: If the Ring Again notice occurs during a parameter change, the
prompt only appears after the change has been completed.
Note 2: If the notice occurs during an active call, the Ring Again notice
is ignored. When the active call is completed, you will be notified that
the Ring Again call was canceled.
You can also cancel the Ring Again request at this time.
DATA STATION NOW AVAILABLE, PLACE CALL? (Y/N/[Y]): <SP>
N <CR>
RING AGAIN CANCELLED
Primary Commands Menu:
A - Auto Dial S - Speed Call
C - Call M - Modify
D - Display
CTRL Z (Abort Keyboard Dialing)
Select: <SP>
NT7D16 Data Access card
Circuit Card
Page 483 of 906
Description and Installation