Nortel Circuit Card Installation Manual page 418

Page 418 of 906
553-3001-211 Standard 3.00
NT6D80 MSDL card
Disabling the MSDL
To disable an MSDL card, enter
To disable the MSDL and all its ports, enter
Resetting the MSDL
To reset an MSDL and initiate a limited self-test, the MSDL must be in a
manually disabled state. To perform the reset, enter
Displaying MSDL status
To display the status of all MSDL cards, enter
To display the status of a specific MSDL, enter
the MSDL, its ports, and the operation of each port appears.
The command
STAT MSDL x FULL
(card ID, bootload firmware version, base code version, base code state,
operation state, date of base code activation) as well as the version, state, and
activation date for each card operation.
Self-testing the MSDL
To perform extensive self-testing of an MSDL, enter
can be activated if the card is in the manually disabled state. If the test passes,
the system outputs the card ID and a pass message. If it fails, the system
displays a message indicating which test failed.
August 2005
.
DIS MSDL x
DIS MSDL x ALL
RST MSDL x
STAT MSDL
STAT MSDL x
displays all information about an MSDL
SLFT MSDL x
.
.
.
. The status of
. This test