Modify Projector Communication Settings; Add A Network Device - Christie CP2215 User Manual

View and Modify Projector Settings
Field
24 Hour Time
Adjust for Daylight Savings Time
Date and Time
Set Time
Enable NTP
NTP Server
Test NTP

Modify Projector Communication Settings

You need Administrator or Service permissions to complete this procedure.
1. Tap Menu > Administrator Setup > Communications Configuration.
2. Complete these fields:
Field
Device Name
IP Address
Subnet Mask
Gateway
Apply
Serial Speed (Baud)
Enable SNMP
SNMP V2 / SNMP V3
Management IP
Download MIB to USB
Apply
Serial Access
Ethernet Access

Add a Network Device

You need Administrator or Service permissions to complete this procedure.
1. Tap Menu > Administrator Setup > Network Devices Setup.
54
Displays time in a 24-hour format.
Automatically adjusts the time for daylight savings.
Adjusts the projector date and time.
Applies the date and time adjustment settings.
Turns Network Time Protocol (NTP) clock synchronization on.
The NTP server IP address.
Tests the NTP server settings.
The name of the projector.
The IP address of the projector.
The subnet mask to which the address belongs.
The IP address for the network gateway.
Applies Ethernet settings.
The baud rate of the serial port. The default is 115200.
Enables SNMP.
The SNMP protocol type. Contact Christie for the SNMP V3 user ID and
password.
The IP address where SNMP information and notifications are sent.
Sends the SNMP Management Information Base (MIB) file to a USB flash
drive.
Applies SNMP settings.
Grants access to serial connections.
Grants access to Ethernet connections.
Description
Description
020-101225-01 Rev. 1 (01-2014)
CP2215 User Manual