Advanced Timings, Clamp Delay - Clamp Width - Barco HDF-W30LP User And Installation Manual

14. Image
• Total lines: Total lines in the source.
How to set up
1. Press Menu on the remote control (RCU) or on the local keypad to activate the menus and select Image → Timings.
Image 14-32
Timings window
2. Press ENTER to select.
3. Use the ▲ or ▼ key to select a setting.
4. Use the ◄ or ► key to change the value
Or,
press ENTER to open the specific adjustment menu.
5. Continue with the other settings in the same way until all timings are set.
For a new measurement, press the Auto Image button on the RCU or local keypad.

14.5.2 Advanced timings, clamp delay - clamp width

About the advanced settings
Clamp delay
Clamp width
Sync
pulse
Clamp
pulse
Image 14-33
146
The time between the trailing edge of the sync pulse and the leading edge of the clamp pulse, in pixels.
Can be any value between 0 and 255.
The width of the clamp pulse can be any value between 0 and 255.
Clamp Clamp
delay width
R5906730 HDF WLP SERIES 01/08/2017