Adjustment Of The Folding Position - Konica Minolta bizhub C250 Service Manual

5. Mechanical adjustment
5.4

Adjustment of the Folding Position

• Folding position is adjusted by adjusting the Tray Section and the Saddle Section.
• Adjust the folding position by aligning the Tray Section. Adjust the position of the Saddle
Section if the position is still not proper.
<Deviation amount which will be adjusted>
Amount of deviation which will
Paper Size be adjusted by aligning the Tray
A3
A4
B4
Ledger
Letter
5.4.1 Adjustment procedure
Deviated downward
Exit
direction
32
Amount of deviation which will
be adjusted by aligning the
Section Saddle Section position
0.55 mm
0.4 mm
0.5 mm
0.55 mm
0.35 mm
Deviated upward
Exit
direction
4583F3E525DA
[1]
4583F3C518DA
Field Service Ver. 1.0 Jul. 2005
Total amount which
0.55 mm
0.4 mm
0.5 mm
0.55 mm
0.35 mm
A. Checking the deviation amount
1. Load the Paper Take-up Tray with A3
paper.
2. Select [Fold & Staple] and touch
[OK].
3. Place the A3 Original (Blank paper
acceptable) to the original tray, and
press the Start key.
4. Check the fed out copy to see if there
is any deviation.
B. Adjusting the folding deviation
1. Turn main power switch OFF, and
remove the Finisher from the
machine.
2. Remove the cable, and remove the
Horizontal Unit [1].
will be adjusted
1.1 mm
0.8 mm
1.0 mm
1.1 mm
0.7 mm