Changing The Setting For Scanned Original Density; Test/Photo, Text Mode Setting - Konica Minolta bizhub 266 User Manual

5
5.4

Changing the setting for scanned original density

The setting for the scan quality of the original can be changed in the screen used to set density.
5.4.1

Test/Photo, Text mode setting

This indicates the setting procedure in the image quality setting when [TEXT/PHOTO] or [TEXT] is set.
1
Press the Scan key.
The machine switches to the scan mode.
2
Press the Density key.
A screen used to set density appears.
3
Specify desired density.
% If [COLOR SETTING] for Quality is set to [BW], use the +/, key to select either [AUTO] or [MANU-
AL].
% If the image quality of original type is either [TEXT/PHOTO] or [TEXT], select [AUTO] or [MANUAL].
For Auto setting, select [AUTO], then press the OK key. For the manual setting, select [MANUAL],
press the * or ) key, then press the OK key.
% If [COLOR SETTING] for Quality is set to [GRAY] or [COLOR], [AUTO] is not displayed. The gray set-
ting can only be made using [MANUAL].
% When setting manually, pressing the * key reduces density. Pressing the ) key increases density.
% When the OK key is pressed after density is adjusted, the scan screen will display a density corre-
sponding to the adjusted density.
Tips
The factory default is [AUTO].
5-12
Changing the setting for scanned original density
DENSITY(TEXT/PHOTO)
AUTO
MANUAL
5.4
bizhub 306/266