10. Service Mode; 10.1 Service Mode Function Setting Procedure - Konica Minolta bizhub C450 Service Manual

Hide thumbs Also See for bizhub C450:

Table of Contents

10. Service Mode

• Ensure appropriate security for Service mode function setting procedures. They

should NEVER be shown to any unauthorized person not involved with service

A. Procedure

1. Press the Utility/Counter key.

2. Touch "Details" on "Meter Count" display.

3. Press the following keys in this order.

• When selecting "CE Authentication" under "Enhanced Securiy" available from

Service Mode, authentication by CE password is necessary.

Enter the 8 digits CE password, and touch "OK" key.

(The initial setting for CE password is "92729272.")

• If a wrong CE password is entered, re-enter the right password. The machine will

not enter Service Mode unless the CE password is entered correctly. To return to

the Basic screen, turn Main Power Switch OFF, and ON again.

• The service code entered is displayed as "

4. The Service Mode menu will appear.

• Be sure to change the CE Password from its default value.

• For the procedure to change the CE Password, see the Enhanced Security.

• Touch the "Exit" key.

C. Changing the Setting Value in Service Mode Functions

• Use the +/- key to enter or change the setting value.

• Use the 10-Key Pad to enter the setting value. (To change the setting value, first press

the Clear key before making an entry.)

Field Service Ver. 1.0 Mar. 2005

4037F3E502DA

Show Quick Links

Table of Contents