High Voltage Unit (Hv1) - Konica Minolta bizhub C250 Service Manual

6. Other
6.3.23

High Voltage Unit (HV1)

[2]
[3]
[4]
[5]
80
1. Remove the PWB Box.
☞ 112
2. Disconnect four Connectors [1].
[1]
4038F2C085DA
3. Remove five Screws [2] and the tab
[3], and remove the High Voltage
Unit [4].
NOTE
• When installing the High Voltage
Unit, make sure that the terminal
[2]
end surely contacts.
4038F2C086DA
NOTE
• When installing the High Voltage
Unit, make sure that the claw [5]
shown in the left illustration is
surely set up.
4038F2C087DA
Field Service Ver. 1.0 Jul. 2005