8L - 18
LAMPS
REMOVAL AND INSTALLATION (Continued)
INSTALLATION
(1) Reverse the removal procedure.
LAMP OUTAGE MODULE
REMOVAL
(1) Disconnect battery negative cable.
(2) Remove spare tire from carrier.
(3) Remove access door.
(4) Remove screw holding module to inner quarter
panel (Fig. 2).
(5) Disconnect wiring connectors at module.
(6) Separate lamp outage module from vehicle.
INSTALLATION
(1) Connect wiring connectors at module.
(2) Install screw holding module to inner quarter
panel.
(3) Install access door.
(4) Install spare tire.
Fig. 2 Lamp Outage Module
(5) Connect battery negative cable.
ZG