Jeep 1997 Grand Cherokee Service Manual page 504

MOUNTING SCREWS MOUNTING SCREW PARK LAMP MOUNTING SCREW SIDE MARKER TURN SIGNAL
8L - 14 LAMPS
REMOVAL AND INSTALLATION (Continued)
Fig. 2 Park Lamp
(4) Remove sidemarker socket from lamp.
(5) Separate lamp from vehicle.
Fig. 3 Turn Signal And SideMarker Lamp
INSTALLATION
(1) Install turn signal lamp socket.
(2) Install side marker lamp socket.
(3) Slide lamp into slot provided on inboard side of
headlamp assembly.
(4) Install screws.
(5) Install parking lamp.
HEADLAMP MOUNTING TAB TURN SIGNAL BULB REMOVAL MOUNTING SLOT PARK LAMP
TAIL, STOP, TURN SIGNAL, BACK-UP AND SIDE
MARKER LAMP
The stop, turn signal, back-up and rear side
marker lamps are incorporated into the tail lamp.
REMOVAL
(1) Remove screws attaching lamp to body (Fig. 4).
(2) Remove bulb sockets from lamp.
(3) Separate lamp from vehicle.
Fig. 4 Tail Lamp
INSTALLATION
(1) Position lamp at vehicle and install bulb sock-
ets.
(2) Position lamp on vehicle and install screws.
LICENSE PLATE LAMP
REMOVAL
(1) Remove screws attaching license plate lamp to
license plate housing.
(2) Separate lamp from housing.
(3) Grip bulb socket, rotate counterclockwise and
separate bulb socket from license plate lamp.
INSTALLATION
(1) Position bulb socket in license plate lamp and
turn clockwise.
(2) Position license plate lamp in license plate
housing.
(3) Install screws attaching license plate lamp to
license plate housing.
MOUNTING TABS RIGHT REAR LAMP
ZG