ZG
REMOVAL AND INSTALLATION (Continued)
(3) Remove the gauge(s) from the front of the clus-
ter circuit and gauge housing.
(4) Reverse the removal procedures to install.
CLUSTER BULB
WARNING: ON VEHICLES EQUIPPED WITH AIR-
BAGS, REFER TO GROUP 8M - PASSIVE RESTRAINT
SYSTEMS BEFORE ATTEMPTING STEERING WHEEL,
STEERING COLUMN, OR INSTRUMENT PANEL COM-
Fig. 7 Gauge Mounting Screws
Fig. 8 Cluster Bulb Locations
PONENT DIAGNOSIS OR SERVICE. FAILURE TO
TAKE THE PROPER PRECAUTIONS COULD RESULT
IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSI-
BLE PERSONAL INJURY.
(1) Remove the instrument cluster as described in
this group.
(2) Remove the bulb and holder from the rear of
the cluster housing by turning the holder counter-
clockwise (Fig. 8).
INSTRUMENT PANEL SYSTEMS
8E - 25