Jeep 1997 Grand Cherokee Service Manual page 506

DOME BRACKET LAMP
8L - 16 LAMPS
REMOVAL AND INSTALLATION (Continued)
Fig. 7 Dome/Reading Lamp
(4) Install the lamp housing screws.
(5) Position dome lamp lens at lamp housing. Snap
lens into housing.
DOOR COURTESY LAMP
REMOVAL
(1) Remove door trim panel. Refer to Group 23,
Body Components for service procedure.
(2) Remove bulb socket from lamp.
(3) Depress lamp locking tabs and separate lamp
from trim panel.
INSTALLATION
(1) Position lamp in trim panel and snap into
place.
(2) Install bulb socket in lamp.
(3) Install door trim panel.
DOME READING LAMP LENS AND
CARGO LAMP
REMOVAL
(1) Insert a flat blade screwdriver in slots provided
at lower portion of lens.
(2) Rotate screwdriver upward until lens snaps out
of housing.
(3) Remove lens from housing (Fig. 8).
LIFTGATE (4) Remove
upper trim panel/cargo lamp to liftgate opening roof
panel.
(5) Separate trim panel from roof panel.
(6) Disengage electrical connector for cargo lamp.
INSTALLATION
(1) Position trim panel/cargo lamp at liftgate open-
ing.
(2) Engage electrical connector for cargo lamp.
(3) Install screws attaching liftgate opening upper
trim panel/cargo lamp to liftgate opening roof panel.
(4) Position lens on cargo lamp and snap into
place.
UPPER PANEL OPENING screws attaching
Fig. 8 Cargo Lamp
ZG
liftgate CARGO opening LAMP LENS